Configure The Measurement Settings; Configure The Peripheral Settings; Make A Sample Tray Template - Beckman Coulter QbD1200 Manual Del Usuario

Configure the measurement settings

1. Push Instrument Setup>Measurement Settings.
2. Select an option.
Option
Default settings
Pre-Configured
Trays
3. Push Save or Cancel.

Configure the peripheral settings

1. Push Instrument Setup>Peripheral Settings.
2. Select an option.
Option
Printer Settings
Autosampler
Settings
Measurement
Do a measurement
1. Push Perform Measurement.
2. Select an option.
Option
Create New Tray
Load Tray From File
Manual Measurement
Select a Pre-Configured Tray
from List
3. Read the parameters of the selected tray, then make the necessary changes.
4. Push to start the measurement.

Make a sample tray template

1. Push Perform Measurement>Create New Tray.
2. Select the tray options. Push
Option
How many samples Sets the quantity of sample locations. When a sample location is selected for
How many reps
Description
Sets the default create tray wizard settings: the number of sample locations (1 to 64),
sample replicates (1 to 4), standard positions, default labels (date/time, ID
individually, ID builder) and sample views (tray or table).
Shows the user-specified list of pre-configured trays. If a tray is configured, select the
default tray or remove a tray.
Description
If a printer is connected to the instrument, push Add>Install. If more than one printer
is installed, set the default printer or remove a printer.
If an auto sampler is connected to the instrument push Autosampler Settings.
Select "Enable Autosampler", then select "Qbd1200 Autosampler". Push Save>Ok.
Description
Makes a new sample tray. Refer to
on page 15.
Imports trays from a USB flash drive that has sample tray parameters
set.
Sets up a manual measurement of one specified sample. Enter the
sample ID and the quantity of samples to replicate.
Selects a sample tray that is saved in the system to measure.
to go to the next screen.
Description
measurement, each sample location is identified with a blue circle.
Sets the quantity of sample replicates to measure (1 to 4).
Make a sample tray template
English 15