Kärcher Duo Smart Manual De Instrucciones página 5

have understood the resultant
dangers involved.
Children may only perform
cleaning work and user mainte-
nance under supervision.
Symbols on the device
Watering valve
Protecting the device against frost
Symbols on the device
Gateway
Only use the device indoors
Only use the approved power supply
6.745-110.0 input: 5 V / 1 A
Safety instructions for
watering valve
 Only operate the watering
valve with untreated, clean
fresh water. The device must
not under any circumstances
be operated with explosive,
corrosive or inflammable sub-
stances.
 The water temperature must
not exceed 35 °C.
 Do not exceed the water sup-
ply pressure of 10 bar (1 MPa)
at the device inlet.
 Never fully immerse the wa-
tering valve in liquids.
 Only operate the watering
valve outdoors.
 Regularly check the watering
valve for damage. Do not use
the device if you discover visi-
ble damage.
 Only operate the watering
valve in a vertical position.
 Do not use sealing compound
or lubricant to connect the wa-
tering valve to the tap.
 Do not operate the device
without the integrated filter at
the water inlet.
 Regularly check the filer at the
water inlet for damage. Parti-
cles in the water which enter
the device through a damaged
filter will prevent the valve
from opening and closing
properly.
 Replace the damaged water
filter immediately.
 Check the device for leaks at
least once a month if the de-
vice has been shut down for a
long period of time and ensure
that the valves open and close
reliably.
 Do not pull on connected hos-
es.
 Observe wall and surface re-
quirements before wall mount-
ing.
 When mounting on the wall,
check the load capacity of the
wall. Mount the device secure-
ly on the wall.
 The device must be accessi-
ble at all times. Do not mount
the device in inaccessible
places or higher than
2 meters.
 Do not install the watering
valve near heat sources and
English 5