Cleaning The Air Quality Sensor; Replacing The FIlter; Filter Replacement Indicator - Philips DE5205 Manual Del Usuario

Cleaning the air quality
sensor
Clean the air quality sensor every
2 months for optimal functioning of the
dehumidifier.
Note
If the humidity level in the room
•
is very high, condensation may
develop on the air quality sensor
and the air quality light may indicate
a more poor air quality even though
the air quality is actually good. If this
occurs, clean the air quality sensor
or use the dehumidifier on a manual
speed setting.
If the dehumidifier is used in a dusty
•
environment, it may need to be
cleaned more often.
1
Switch off the dehumidifier and
unplug from the wall outlet.
2
Clean the air quality sensor inlet and
outlet with a soft brush (fig.ƒ).
3
Remove the air quality sensor cover
(fig.„).
4
Clean the air quality sensor, the
dust inlet and the dust outlet with a
damp cotton swab (fig....).
5
Dry all parts thoroughly with a dry
cotton swab.
6
Reattach the air quality sensor cover
(fig.†).
14 EN
7 Replacing the
filter
Filter replacement
indicator
This dehumidifier is equipped with a
filter replacement indicator to make sure
that the air filter is in optimal condition
when the dehumidifier is operating.
When the filter needs to be replaced,
the filter replacement alert
on the screen.
If the filter is not replaced in 14 days,
the dehumidifier will stop operating and
automatically lock. You need to replace
the filter immediately.
Replacing the filter
Note
• The filter is not washable nor
reusable.
Always turn off the dehumidifier and
•
unplug from the electrical outlet
before replacing the filter.
Do not clean the filter with a
•
vacuum.
Replace the filter when A5 and
display on the screen.
1
Switch off the dehumidifier and
unplug from the wall outlet.
2
Take out the used filter according to
the filter alert light status displayed
on the screen. Discard used filters
(fig.‡).
displays