Standard Accessories; Optional Accessories; Battery Removal/Installation - Hitachi NP 14DSL Instrucciones De Manejo

English

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the
accessories listed in the table below.
1 Charger
2 Battery
3 Plastic case
4 Battery cover
5 Eye protector
6 Nose cap
(mounted on tool)
7 Hex bar wrench (4mm)
Standard accessories are subject to change without
notice.

OPTIONAL ACCESSORIES

(Sold separately)
Battery
(BSL1420, BSL1440)
Optional accessories are subject to change without notice.
APPLICATION
Cabinet and picture frame assembly, furniture trim.
On-site and mobile home trim and molding.
Before
charging
While
The
charging
pilot lamp
lights or
Charging
blinks in
complete
red.
Charging
impossible
The
pilot lamp
Overheat
lights in
standby
green.
15
2LLRK 2LBRK
1 1
2(4.0Ah) 2(2.0Ah)
1 1
1 1
1 1
2 2
1 1
(BSL1820, BSL1840)
Indications of the pilot lamp
Lights for 0.5 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Blinks
Lights continuously
Lights
Lights for 0.5 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Blinks
Lights for 0.1 seconds. Does not light for 0.1
seconds. (off for 0.1 seconds)
Flickers
Lights continuously
Lights

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Fig. 2).
NK
CAUTION
Never short-circuit the battery.
–
2. Battery installation
–
Insert the battery while observing its polarities (see
Fig. 2).
1
–
CHARGING
1
Before using the power tool, charge the battery as follows.
2
1. Connect the charger's power cord to a receptacle.
When the power cord is connected, the charger's
1
pilot lamp will blink in red. (At 1-second intervals)
2. Insert the battery into the charger.
Firmly insert the battery into the charger until the line
is visible, as shown in Fig. 3, 4 .
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously
in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
Table 1
Malfunction in the
battery or the charger
Battery overheated.
Unable to charge
(Charging will commence
when battery cools).