Configuration (Setup Menu); Parameter Settings (Overview) - Acculab VICON Manual De Instrucciones

Configuration (Setup Menu)

To configure the balance/scale; i.e., adapt the balance/scale to individual requirements.
Step
1. Switch off the balance/scale
2. Switch on the balance/scale and
while all segments are displayed
Navigation in the Setup Menu
Key Press briefly
(ENTER) Menu level: move to the right (cyclical)
(F)
Menu item: Scrolling
(ZERO)
Menu level: Move to the left

Parameter Settings (Overview)

Setup 1 Weighing
menu
5. and 6.
8. Additional
functions
9. Reset menu
Key (or instruction)
(ON/OFF)
(ON/OFF)
(ZERO) briefly
Press and hold
Confirm setting
–
Save settings and exit Setup
1.1. Adapt filter
1.2. Application filter
1.3. Stability range
1.5. Calib./adjust./linearization:
Function of the (CAL) key
1.6. Auto zero
1.7. 1st weight unit, or 2nd unit in
Toggle Weight Units app.
Only relevant with built-in data interface: see corresponding interface description
8.1. Block key functions
8.2. Automatic shut-off
9.1. Factory settings
Display
ο Factory setting √ User-defined setting
1.1.1 Very stable conditions
ο Stable conditions
1.1.2
1.1.3 Unstable conditions
1.1.4 Very unstable conditions
ο Final readout
1.2.1
1.2.2 Filling
1.3.1 1/4 digit
1.3.2 1/2 digit
1.3.3 1 digit
ο 2 digits
1.3.4
1.3.5 4 digits
ο Calibration/adjustment
1.5.1
1.5.2 Linearization: for service personnel only
1.5.3 Key blocked
ο On
1.6.1
1.6.2 Off
1.7.1 User-defined unit; see
to 1.7.23 "Toggling between Weight Units"
8.1.1 All keys blocked except for (ON/OFF)
and (ZERO)
ο All keys unblocked
8.1.2
ο After 2 minutes
8.2.1
8.2.2 After 5 minutes
8.2.3 After 10 minutes
9.1.1 Restore
ο Do not restore
9.1.2
13