Isotherm TB31 Instrucciones De Uso página 15

InstAllAtIon
- Place the refrigerator on a dry, sheltered, flat surface and away from any edges. The refrigerator must
not be used unsheltered, in the open air or exposed to splashing or rain.
- Your refrigerator requires good ventilation, especially around the back of the refrigerator, allow a gap
of at least 15 cm around the sides, back and top. Never use your refrigerator in the in a enclosed
space.
- Do not install the refrigerator near heat sources, sunlight.
- To fix it inside the boat and to avoid damages during transport, we suggest to secure the fridge trough
metal brackets placed on the sides
- Avoid introducing liquids or ice not inserted in containers
- Do not put hot food items into the refrigerator.
USING THE REFRIGERATOR WITH A BATTERY (12V/24V)
- Connect the feeding cable to a direct current 12 or 24 V DC power source.
- Make sure the polarity is right.
- The supply line is protected by a 15 A fuse located on the box.
- If connected to an existing cigarette plug, carefully check up that power supply is sufficient.
- If the supplied power cable is not used, see the table containing the information related to the cable
section:
CABLE AREA
mm
2,5 (AWG 14)
4 (AWG 10)
6 (AWG 8)
2
(AWG)
L O
W
H I G
H
M E
D
189A0473
MAX CABLE LENGHT METRES (ft)
12V
5 (15)
8 (25)
12 (35)
ISO 9002 certified
ENGLISH
24V
8 (25)
12 (35)
12 (35)
CG_07062012