Operation; Cleaning And Care; Disposal - Powerfix Profi Z15003 Instrucciones De Montaje

off again. Check again that all the screws,
bolts and fixings are firmly seated.
©

Operation

Place the workpiece on to the base plate
against the rear stop
27
vice .
41
Note: Ensure that the workpiece lies against
the base plate .
32
CAUTION! DANGER OF INJURY! Ensure
that the length of the workpiece is at least half
the length of the stop
27
piece may become loose and slide out.
Set the vice so that the workpiece lines up
41
with the centre of the cutting disc.
Now switch on the angle grinder and press it
down on to the workpiece.
Avoid any backwards movement and apply
even pressure on the workpiece.
©

Cleaning and care

Use a slightly moist, fluff-free cloth when you
are cleaning or polishing the product.
©

Disposal

The packaging is made entirely of recycla-
ble materials, which you may dispose of
at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
Assembly / Operation / Cleaning and care / Disposal
32
and secure it with the
, otherwise the work-
GB/MT 27