Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
out.
Do not push and hold the self clean button while ironing.
AUTO-SHUT-OFF FUNCTION
The auto-shut-off function automatically switches off the iron if it has not been moved for a while.
The auto-off pilot light starts flashing (or the buzzer will start beeping) to indicate that the iron has
been switched off by the auto-shut-off function.
To let the iron heat up again:
Pick up the iron or move it slightly.
The auto-off pilot light stop flashing (or the buzzer will stop beeping). if the temperature of the
soleplate has dropped below the set ironing temperature, the temperature pilot light will turn on.
If the temperature pilot light truns on after you have moved the iron, waiting until it goes out
before you start ironing.
If the temperature pilot light does not go on after you move the iron, the soleplate still has the
right temperature and the iron is ready for use.
When Auto-shut-off function happens you may hear a sound.
CARE AND CLEAN
Before cleaning, set the steam control knob to the "0" or " ", unplug the iron from wall socket, and
allow the appliance completely cool down, and then clean with a damp cloth, do not immerse the unit
into water or other liquids.
Regularly rinse the water tank with water, empty the water tank after clean.
If ironing clothes with high temperature, which is not recommended on the garment table, will cause
burns to your clothes and residue left on the soleplate of the unit, it is proposed to iron a old cloth to
remove these residue from the soleplate.
If you use spray starch, wipe the soleplate occasionally with a soft damp cloth to prevent the build-up
of deposits.
After use, set the steam control knob to the "0" or " ", disconnect the unit from main socket, empty
remaining water from water tank and then store the iron after it has been completely cooled down.
Never use scouring pads, abrasive or chemical cleaners, or solvents to clean the exterior or soleplate of
your iron. Doing so will scratch and/or damage the surface.
When the time comes to eliminate this product, please consider the environmental impact and
take it to recognised recycling facility instead of disposing it with general household waste.
Take the equipment to a waste disposal site. Plastic and metal parts that are used in the
construction of this appliance can be separated into pure grade which allow recycling. Ask to
your service centre for details. Everyone of us can participate on the environmental
protection.
Royal Decree-Law 1/2007, of 16 November, grants goods of a durable nature a le-gal
Publicidad
Tabla de contenido
