Optiheat Control (3 Step Residual Heat Indicator); Daily Use; The Heat Setting; Using The Cooking Zones - Electrolux KIV64463 Manual De Instrucciones

4.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
burns from residual heat.
The indicators show the
level of the residual heat for
the cooking zones you are
currently using. The
indicators may also come on
for the neighbouring cooking
zones even if you are not
using them.

5. DAILY USE

WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch
deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
symbol
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After some
time
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
/ / There is a risk of
for 1 second to activate or
comes on and the cooking
comes on and the hob
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
Heat setting
, 1 - 3
4 - 7
8 - 9
10 - 14

5.3 The heat setting

To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.

5.4 Using the cooking zones

Place the cookware in the centre of the
selected zone. Induction cooking zones
ENGLISH 11
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hour