Inspection And Maintenance - Weka 816 Serie Instrucciones De Montaje

INSPECTION AND MAINTENANCE

The following regular checks must be performed:
Routine check (weekly to monthly)
Check
- if all bolts, nuts and screws are tight
- the condition of the suspension hook, the figure-of-eight hook, the rings, the plastic fasteners and the
ropes. Replace any
damaged parts.
- if the ground and safety area accord with the safety notes above
Effectiveness check (1 to 3 months)
Check
- the stability of the ground anchoring and structure
- for unusual wear and replace any damaged parts
Periodic check (once or twice a year)
Check
- for rust and erosion
- for unusual wear and replace any damaged parts
RECOMMENDATION
• Predrill all bolted connections to
prevent damage to the wood parts.
The following symbol draws your attention
to this throughout the instructions:
WOOD
• Wood is a natural product. Varied colouring, knurls and crack formation are normal and have no
influence on the structural engineering.
• Shrinkage shake may occur due to extreme weather, especially after longer
warm periods. These dry cracks are in no way a defect in quality but are a part of the natural
appearance of the wood. Depending on the weather, these cracks may close up again to a minimum.
Moreover, these dry cracks, which form longitudinally in the wood, have no effect on the strength and
resilience of the material.
WOOD PRESERVATION FOR UNTREATED PRODUCTS
• Untreated wood requires wood preservation measures.
For professional wood preservation treatment, contact a wood preservative expert.
Before assembly, we recommend that you treat all untreated wood components with blue stain
and then with a wood protection agent. Regular painting according to the
specifications of the manufacturer of the wood protection agent is necessary to protect the wood.
Techn. Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.
7
 Copyright HRB 3662