Product Features - Bosch GLM 30 Professional Manual Original

OBJ_BUCH-2004-006.book Page 19 Tuesday, December 22, 2015 12:35 PM
Digital Laser Measure
Individual measurement per
battery set
Setting the unit of measure
Setting the sound
A) For measurements from the rear measuring tool edge, weak backlighting and 25 °C operating
temperature are applicable for high reflectivity of the target (e.g. a white-painted wall). In addition,
a deviation influence of ± 0.05 mm/m must be taken into account.
B) For measurements from the rear measuring tool edge, strong backlighting and – 10 °C to +45 °C
operating temperature are applicable for low reflectivity of the target (e.g. a black box). In addition,
a deviation influence of ±0.15 mm/m must be taken into account.
C) The width of the laser line depends on the surface characteristics and on the ambient conditions.
D) except battery compartment
The measuring tool can be clearly identified with the serial number 5 on the type plate.

Product Features

The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1 Display
2 Measuring button
3 Battery lid
4 Latch of battery lid
5 Serial number
6 Laser warning label
7 Reception lens
8 Laser beam outlet
9 Laser target plate*
10 Laser viewing glasses*
11 Protective pouch*
* The accessories illustrated or described are not included as standard delivery.
Display Elements
a Auto-sum
b Previous measuring value
c Current measuring value
d Laser, switched on
Bosch Power Tools
English | 19
GLM 30
5000 5000

–

–
1 609 92A 1Z6 | (22.12.15)