Leckey Freestander Manual Del Usuario página 9

Attaching the Tray
The Freestander tray is attached by sliding
the outer poles already attached to the tray
over the inner poles already attached to the
base and then tightening the bolts (a).
The tray is then secured with a tray pin into
one of the slots on the side of the frame.
a
Attaching the sandals
To attach the sandals unscrew the plastic
knob (A) from the underside of the sandals
and remove the metal and rubber washer
along with the knob. Align the screw with
the slot in the foot plate, replace the rubber
washer and then the metal washer before
tightening the plastic knob. Make sure the
sandal does not move when the knob has
been tightened.