MARQUES B ONE Serie Manual Del Usuario página 13

B O N E – U S E R M A N U A L
BEFORE USING THE SCALE
Thank you for purchasing B ONE. In order to use the scale properly, please read this User
Manual carefully before use. If you have problems concerning the scale, please contact your
supplier.
1. Fully charge the battery before first use.
Charge the battery by plugging in the power cord, the charging light will be in red (It takes about
8-12 hours to full charge the battery).
2. Install the equipment on a level and stable surface. Do not use the equipment in an environment
of either:
a. Gusty wind (e.g. near an air conditioner outlet or fan outlet) or
b. Vibration (e.g. near a heavy machine).
3. Install the equipment in a temperature environment within 0ºC~40ºC, avoid using it in an
environment where temperature changes a lot.
Please check the voltage before plugging in; independent AC outlet for this equipment is
recommended to avoid interference.
PREPARING TO USE THE SCALE
1. Open the box and put the scale on a stable table, then put the pan on the scale.
2. Adjust the base feet, watch the level bubble, and make it in center and the four feet on the
platform.
3. Turn on until all window show "0" and the "stable" indicate, then the scale will be ready to use.
MAIN TECHNICAL INSTRUCTION
1. Tare range: ≤ 50% Max Cap.
2. Display:
a. There are 5 digits in the weight window, 5 digits in the unit price window, and 6 digits in
the total price window;
b. Accumulation: The maximum number of accumulation is 99; the max accumulation price
is 9999.99.
3. Zero range: ≤±2% Max.
4. Ambiente:
a. Environment: Using temperature: 0-40ºC and humidity ≤ 85%.
1 1 / 2 0 1 9 , R E V . 1 . 0
E N
1 3