Basic Operation - Premier SX-5257BT Manual De Instrucciones

BASIC OPERATION

PREPARATION
1). Before turning on, check whether all the connection are correct and reliable. Insert the power plug
into the corresponding power socket. Press the power switch to power on the unit.
2). Press STANDBY
3). Press EJECT
the disc tray out, put the disc into the tray, press either button again, the unit starts reading and
playing automatically.
STANDBY
Press the STANDBY button on the remote control (or front panel) can switch on the unit or to the
standby mode.
MODES SELECTION
1) Press the VIDEO, BT, FM, AUX, or USB button on remote control to select the mode.
2) Press the VIDEO/USB button on the front panel to select VIDEO or USB mode.
3) Press the BLUE-CONNECT, FM, or AUX button on the front panel to select the mode.
PLAY/PAUSE
In play status, press PLAY/PAUSE button to pause the playing, press again to resume playback.
PREVIOUS & NEXT
In play status, press
FAST FORWARD & FAST BACKWARD
In play status, press
the speed X2, X4, X8, X16, X32.
VOLUME ADJUSTMENT
Press VOL-/+ button or rotate the volume knob to turn up or down the volume to a comfortable level.
MUTE
Press the MUTE button to mute the sound, press MUTE again or press VOL+/- button to resume the
normal status.
NUMBER BUTTONS
Use NUMBER buttons to select tracks, frequency or stations etc.
(E.g. if you want to play track 12, press the number button 1", then press 2".)
STOP
Press STOP button to stop playing, press PLAY/PAUSE
ANGLE VIEW
Press ANGLE button on remote control repeatedly to view the video on different angles. (The disc
must support this angle function.)
button to wake up the unit (or put into standby mode).
button on the remote control or OPEN/CLOSE button on the front panel to carry
9 :
button or button to skip to the previous or the next track.
7 8
button
or , there will be different speeds of fast forward or fast rewind at
"
button to start from beginning.
7
"