Insert Tools, Accessories - Hilti DEG 500-D Manual De Instrucciones

Do not use extension cords with 16 AWG conductor cross section.
2.10 Using extension cords outdoors
When working outdoors, use only extension cords that are approved and correspondingly marked for this application.
en
2.11 Using a generator or transformer
This power tool may be powered by a generator or transformer when the following conditions are fulfilled: The unit
must provide a power output in watts of at least twice the value printed on the type identification plate on the power
tool. The operating voltage must remain within +5% and -15% of the rated voltage at all times, frequency must be in
the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and
starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.
2.12 Guard with side cover 2
CAUTION
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications, use
only the guard with cover plate. This is available as an optional accessory.

3 Insert tools, accessories

125 mm / 5" diameter discs for max. 11000/min and a max. peripheral speed of 80 m/sec
Designation
Abrasive cutting disc
Abrasive cutting disc
Abrasive cutting disc
Abrasive grinding disc
Abrasive grinding disc
Abrasive grinding disc
Diamond cutting discs
Diamond grinding disc
150 mm / 6" diameter discs for max. 9300/min and a max. peripheral speed of 80 m/sec
Designation
Abrasive cutting disc
Abrasive grinding disc
Diamond cutting discs
Items not supplied by Hilti
Designation
Wire brushes
Rubber backing pads
Accessories for the DEG 500 and DEG 600
Designation
Guard with side cover
Vacuum cleaner recommended by Hilti
Toolbox
4
Item number, description
AC-D Universal Premium
AC-D Universal Super Premium
AC-D INOX
AG-D Universal Premium
AG-D Universal Super Premium
AF-D abrasive flap disc
DC‑D 125/5"
DG‑CW 125/5"
Item number, description
AC-D Universal Super Premium
AG-D Universal Super Premium
DC-D 150/6"