Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
before using the aPPliance for the first tiMe
1. Remove
all
packaging
transport safety equipment.
2. Clean all parts with a damp cloth, as descri-
bed in „Cleaning and Care" on page 19.
Milk frothing function
1. Remove the jug from the base.
2. Remove the lid from the jug.
3. Click on the milk froth accessory to the agi-
tator.
Milk heating function
1. Prepare the appliance as described in „Milk
frothing".
2. Click on the milk heating accessory to
the agitator.Add at least 95 ml milk (min.
mark), but no more than 250 ml (top max.
mark) to the jug. Never add more milk, since
the milk may overflow from the jug.
3. Replace the lid.
4. Place the jug on the base.
5. Press the on/off button.
6. The indicator light shows that the appliance
starts heating the milk.
18
18
materials
and
3. Check that the appliance stands firmly.
4. Connect the appliance to the power supply
4. Add at least 95 ml milk (min. mark), but
5. Replace the lid.
6. Place the jug on the base.
7. Press the on/off button.
8. The indicator light shows that the appliance
9. If you wish to interrupt the frothing process,
10. The milk froth is ready in about 90 seconds
11. Remove the jug from the base.
12. Open the lid and remove it from the jug.
13. You can now pour or spoon the milk froth
14. If you wish to froth more milk, allow the
7. If you wish to interrupt the heating process,
(220-240 V~, 50/60 Hz) with the cable.
no more than 150 ml (lower max. mark) to
the jug. Never add more milk, since frothed
milk expands and may overflow from the
jug.
starts frothing the milk.
press the on/off button again.
and the appliance stops automatically.
into a container.
appliance to cool for 2 to 4 minutes. Then
clean the jug as described in Cleaning and
Care.
Important: Make sure that there is
no milk residue in the jug to prevent
germs forming. clean the appliance
after every use.
press the on/off button again.
Publicidad
Tabla de contenido
