Ibiza Light LAS-S130RG-MULTI Manual De Uso página 4

Idiomas disponibles

IMPORTANT

The laser is sensitive to low temperatures. Please operate the laser

at a room temperature of at least 18°C. If the laser is cold, let it heat

up for a while otherwise it might not work.

Operation

Set the switch (7) to ON. Select AUTO or MUSIC controlled mode via the

switch (4). If you select music controlled mode, you can adjust the motor

rotation via the control (3).

For strobe mode, set the switch (7) to position 1. Stroboflash and adjust

the flash rate via the rotary control knob (6).

Set the switch (7) to OFF when you don't use the laser anymore.

Front and rear panel of the unit

1. MIC

2. Laser aperture

3. Motor controller

4. Music controlled / auto run

5. Cooling fan

6. Flash speed control of the strobe

7. Switch: 1. Stroboflash 2. ON 3. OFF

8. Power input jack

This mini stage light projects thousands of small green and red dots on

walls and ceilings that flicker and move to the sound of the music.

ATTENTION: If you use the tripod, please adjust the bracket to keep an

angle of 30° between the bracket and horizontal desktop.

Specifications

Adapter Power supply IN: ............................ 220-240VAC∼50/60HZ

Laser diode .......................................................... Red and Green

Direct output laser power ................ Red: 100mW Green: 30mW

Power of reflected mobile beams ...................................... < 1mW

LAS-S130RG-MULTI