Ibiza Light PAR-MINI-STR Manual De Uso página 4

DMX Channels
CH VALUE
1 0~255
2 0~255
3 0~255
4 0~255
5 0~255
0~255
0~99
6
100~199
200~255
0~9
7
10~255
0~50
51~100
101~150
8
151~200
201~250
251~255
DMX Connection
Cabling must have a male XLR connector on one end and a female XLR connector on the other end.
DMX connector configuration
Termination reduces signal errors. To avoid signal transmission problems and interference, it is always
advisable to connect a DMX signal terminator.
Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the unit's optics.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
Input voltage: ................................................................................ AC100～240V 50/60Hz
Consumption ................................................................................................................. 15W
© Copyright LOTRONIC 2017
FUNCTION
Master dimmer
R dimmer
G dimmer
B dimmer
W dimmer
Strobe function selection
Par & Strobe Light flash at the same time
Par Light flash
Strobe Light flash
No Strobe
Value +, Strobe speed -
Manual Mode, Available from CH1-CH7
Jump change, Same as 'FF**' mode, CH6 adjust speed
Gradual change, Same as 'CC**' mode, CH6 adjust speed
Pulse change, Same as 'EE**' mode, CH6 adjust speed
Auto Mode
Sound Mode
COMMON
DMX +
INPUT
DMX-
PAR-MINI-STR
Resistance 120 ohm
1/ 4w between pin 2
(DMX-) and pin 3 (DMX+)
of the last fixture.
4