Assembly Of The Safetychamber; Attaching The Collection System To The Pump - Medela Clario Instrucciones De Uso

6.3
Assembly of the
SafetyChamber
6.4
Attaching the
canister to the pump
14 |
Preparation for use
1�
2�
3�
4�
1�
2�
1�1 Open the lid of the
SafetyChamber�
2�1 Make sure that both
valves (silicone discs)
are attached to the
SafetyChamber�
See chapter 4�
3�1 Make sure that the lid of
the SafetyChamber is
closed well�
4�1 Hold the SafetyChamber
and tilt 45 ° to the left to
attach it to the motor unit�
4�2 Turn the SafetyChamber
to an upright position until
you hear a click�
1�1 Attach the canister to the
pump� Press firmly�
2�1 Attach the disposable
fingertip tubing to the
suction port�