Reversing The Door Handles - GE GTS21 Manual Del Propietario E Instrucciones De Instalación

Installation Instructions
REVERSING THE DOOR SWING (CONT.)
REMOVING THE DOORS (Cont.)
8. Remove the bottom hinge bolts and relocate the
bottom hinge to the opposite side of the cabinet.
Tighten bolts.
Hinge Pin

REVERSING THE DOOR HANDLES

Stainless Steel Handle
1. Remove handle screws from the top and bottom of
fresh food door.
2. Loosen set screw on handle with the provided 1/8"
wrench.
3. Remove door handle.
4. Change places between the handle fastener and
plug button on door front.
5. Move the plug buttons on top and front of the door
to fill the now vacant holes.
6. On both the refrigerator and freezer doors, remove
the screws from the door stop on one side with a
Phillips screwdriver. Install the door stop onto the
other side of the door.
7. Attach handle to fresh food door with screws at
top of handle. Use 1/8" allen wrench to tighten set
screw at bottom of handle.
8. Attach handle to freezer door with screws at
bottom of handle. Use the provided 1/8" allen
wrench to tighten set screw at top of handle.
9. Attach badge on freezer door opposite the handle.
49-60761
9. Unscrew the hinge pin and move to the other hole
and tighten.
Bottom Hinge
Bottom Hinge
REVERSING THE DOOR HANDLES
Plastic Handle Assembly
1. Remove handle screws from the top of fresh food
door. Remove handle screws from the bottom of
freezer door.
2. Remove door handle on fresh food door by sliding
the handle up off of the fastener. Remove door
handle on freezer door by sliding the handle down
off of the fastener.
3. Change places between the handle fastener and
plug button on door front.
4. Move the plug buttons on top and front of the door
to fill the now vacant holes.
5. On both the refrigerator and freezer doors, remove
the screws from the door stop on one side with a
Phillips screwdriver. Install the door stop onto the
other side of the door.
6. Attach handle to fresh food door by sliding handle
down onto fastener and with screws at top of
handle.
7. Attach handle to freezer door by sliding handle up
onto fastener and with screws at bottom of handle.
8. Attach badge on freezer door opposite the handle.
Hinge Pin
11