Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
- Upside down: On / Off
- Screen protector: Off / 30sec. / 1min. / 3min.
- Format card: YES / NO
- Restore: YES / NO
- Version
- Get out
VIDEO MODE
To record a video enter video mode. Then press the trigger above, the
camera will beep and the status light will flash indicating it is recording.
To stop the video, press the shutter button again and the recording light
will stop blinking and emit a sound indicating that you have stopped
recording.
To record audio: Verify that the camera is in the Video setup menu, select
the Audio Recording to Enable / Disable audio recording, and return to the
preview interface, the MIC icon will show the status in the corner right of
the screen.
NOTE: This camera equips the EIS function with 3-axis gyroscope to detect
movement changes. When the camera is tilted or moved, the sensors use a
cross-border image compensation algorithm to compensate for the change
and produce stable videos. EIS is actually a technology to compensate for
blurring by reducing the quality of the image. This technology tries to
establish a balance between the quality of the image and the instability of
the image.
This camera automatically stops recording when the battery is exhausted.
Your video will be saved before the camera turns off.
This camera automatically stops recording when the SD card is full, if the
loop recording function is turned off.
PHOTO MODE
To take a photo enter the photo mode and then press the shutter button
located above. Set the desired photo mode and the resolution of the
desired photo in advance, if the photo icon on the camera's LCD screen is
not displayed, press the power / mode button repeatedly in the photo
settings menu and select the desired option.
To capture photos with a lapse of time: verify that the camera is selected in
the time lapse mode, press the shutter button, the camera will start the
countdown and emit the shutter sound as soon as a picture is taken.
To capture a burst of photos: verify that the camera is selected in burst
mode, press the shutter button, the camera will emit the shutter sound
each time a picture is taken.
Tips:
Publicidad
Tabla de contenido
