Installing The Battery; Removing The Battery - Reflecta RPL 105 Instrucciones De Empleo

Installing the battery

You can use 4 x AA batteries via the AA battery adapter or
a Sony Li-ion battery NP-550 to power the LED light. To
install the battery, place the battery just in front of the metal
contact and push forward. A 'click' sound will indicate that
the battery is locked in place.

Removing the battery

To remove the battery, press the thumb catch on the unit at
the rear of the battery and push back about 1/4 inch.
WARNING: Used Batteries has to be depollute in a
professional way. Do not throw the batteries into customer
waste.
Press thumb catch and slide battery backwards.
Using the AA battery adapter
You can power the RPL 105 using AA batteries. The provided AA
battery adapter accepts 4 x batteries. Insert the batteries according to
the polarity indicated on the sticker. WARNING: Used Batteries has to
be depollute in a professional way. Do not throw the batteries into
customer waste.
Using the camera adapter
You can use the camera adapter to mount the LED light on your DSLR or
video camera. Slide the small plate of the camera adapter into the receptacle
of the LED light until it clicks into place.
On the other end, is a standard 1/4 x 20 thread foot. Simply slide the foot onto
any standard hot-shoe and tighten the knurled ring. Adjust the side knob for
tilt. You can also mount the LED on any light stand or tripod.
reflecta gmbh ● Junghansring 60 ● 72108 Rottenburg-Ergenzingen / Germany
www.reflecta.de mail@reflecta.de
●