Battery And Charger - Poulan Pro PPB40HT Manual De Instrucciones

BATTERY AND CHARGER

Do not dispose of the battery in a fire. The
cell may explode. Check with local codes for
possible special disposal instructions.
DANGER:
risk of fire, explosion and danger of electric
shock or electrocution:
• DO NOT probe the charger with conductive
materials. The charging terminals hold
120V.
• If the battery pack case is cracked or
damaged, DO NOT insert into the charger.
Replace the battery pack.
• DO NOT charge these battery packs with
any other type of charger.
• DO NOT allow liquid inside the charger.
• DO NOT try to use the charger for any
other purpose than what is presented in
this manual.
WARNING:
battery pack in rain or in wet conditions. Do
not immerse the tool, battery pack, or charger
in water or other liquid.
• Do not allow the battery pack or charger
to overheat. If they are warm, allow them
to cool down. Recharge only at room
temperature.
• Do not cover the ventilation slots on top of
the charger. Do not set the charger on a
soft surface. Keep the ventilation slots of
the charger clear.
• Do not allow small metal items or material
such as steel wool, aluminum foil, or other
foreign particles into the charger cavity.
• Unplug the charger before cleaning and
when there is no battery pack in the cavity.
• Do not place the battery charger or the
battery pack in the sun or in a warm
environment. Keep at normal room
temperature.
• Do not try to connect two chargers
together.
• The battery pack cells may develop a small
leak under extreme usage or temperature
conditions. If the outer seal is broken and
the leakage gets on your skin:
-Use soap and water to wash immediately
-Neutralize with lemon juice, vinegar, or
other mild acid.
• If battery fluids gets in your eyes, flush
immediately with water for at least 15
minutes. Get immediate medical attention.
SAFETY RULES
To avoid serious injury,
Do not charge the
WARNING:
UNDERSTAND ALL INSTRUCTIONS. Failure
to follow safety rules listed below may result
in electric shock, fire, and/or personal injury.
• Do not abuse the cord. Never use the
cord to carry the tool. Never pull on the
cord to remove plug from the outlet. Keep
cords away from heat, oil, sharp edges,
or moving parts. Replace damaged cords
immediately. They may create a fire. Do
not use if damaged.
• Do not place the charger where the power
cord might be stepped on, tripped on, or
subjected to damage.
• A battery-operated tool with integral
batteries or a separate battery pack must
be recharged only with the specified
charger for the battery. A charger that may
be suitable for one type of battery may
create a risk of fire when used with another
battery.
• Use a battery-operated tool only with the
specifically designated battery pack. Use
of any other batteries may create a risk of
fire.
WARNING:
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals
known to cause cancer, birth defects or
other reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and
cement and other masonry products,
and
• Arsenic and chromium from
chemically treated lumber.
Your risk of exposure to these chemicals
varies depending on how often you
do this type of work. To reduce your
exposure to these chemicals, work in
a well-ventilated area, and work with
approved safety equipment, such as dust
masks that are specially designed to filter
out microscopic particles.
BATTERY USE AND CARE
• Ensure the switch is in the off position
before inserting battery pack. Inserting the
battery pack into power tools that have the
switch on invites accidents.
7
READ AND
(PROPOSITION 65)