EN
Place the mower in a central position in the
garden. In the mower menu, select
Accessories > Automower Connect (Requires
mower PIN code) > GeoFence. Enable the
function by selecting Enable GeoFence and
pressing OK. Then select New centerpoint to
set the home positiong of the GeoFence. The
sensitivity of the GeoFence can be changed to
suit the garden. The sensitivity can be set to
low, mid or high. The higher the sensitivity, the
easier the GeoFence alarm will be triggered. If
the alarm is triggered too easily, e.g. giving
false alarm when still inside the garden, select
a lower setting for the GeoFence sensitivity
setting.
When storing the mower for a longer period of
time, e.g. winter storage, it is recommended to
turn off the main switch. If the GeoFence
function is enabled, the PIN code is required
to turn the mower off. When the main switch is
turned off, the Connect function will be active
for an additional 12 hours. After that, it is not
possible to communicate with the mower and
the GeoFence function will not be active.
5.5 Status icons in the
mower
When Automower® Connect is enabled, new
icons are shown in the mower's idle screen.
Bars indicate the signal strength of the
GPRS reception.
An X next to the bars indicates that
there is problem with the connection to
the internet server.
A SIM symbol indicates that there is a
problem with the SIM card or module.
Ensure that the SIM card supports 2G
data communication, that there is a
sufficient amount of money on the card
(for prepaid SIM cards) and that the
APN settings are correct.
Automower Connect_multilingual.indd 14
1 Connect app
functions
1.1 Main menu
•
Control: Shows detailed status of the
mower and lets you send commands to
the mower.
•
GeoFence: The house pin on the map
indicates the home position of the mower.
The circle around the house pin indicates
the GeoFence radius. The other pin on
the map shows the actual position of the
mower and lets you track the mower's
movements, e.g. in the event of a theft.
Click the pin to view the coordinates of
the mower.
•
Configuration: Lets you view and
change all settings that are available in
the mower menu, except for security
settings.
1.2 My Mowers
Shows the status of and lets you handle all
mowers connected to the account as well as
pairing additional mowers to the account.
2 Using a non-
smartphone (SMS
only)
2.1 SMS settings
If the SMS function is to be used, the function
must be enabled in the mower menu. Select
Accessories > Automower Connect (Requires
mower PIN code) > Communication > Use
SMS. The phone numbers of the mobiles that
2015-04-02 15.26