Setting The Timer - Brandt BPI6210B Manual De Instrucciones

3.2
BURNER SELECTION
Select the burner which is the right size for the
bottom of your cookware (see table). If the base
or the cookware is too small, the power indicator
will start to flash and the burner will not work,
even if the cookware's material is recommended
for induction.
Diameter of
Hob
burner
model
16 cm
b-c-d-e-g-f
18 cm
a-b-c-d-e-g
21 cm
b-c-d-g
28 cm
When you use maximum power on several
burners at once, position your cookware
following the model of your hob as indicated on
the illustrations (3.2.1 - 3.2.2 - 3.2.3).
= recommended positioning.
= positioning to avoid.
In this way you will avoid automatic power
limitation on one of the burners if positioning is
not optimal.
4
4.1
SWITCHING ON - STOPPING
Switching on:
Press the key corresponding to the required
burner.
A 0 and a beep indicate that the cooking zone is
on. You can adjust the required power of the
burner selected. If you do not set the power
level, the cooking zone will be switched off
automatically (4.1.1).
Stopping a zone:
Keep the key corresponding to the required
burner pressed down.
A long beep sounds and the display switches off
or the "H" symbol (residual heat) appears.
Diameter of
Maximum
power of
bottom of
burner
cookware
(Watts)
2000 10 to 18 cm
2300
11 to 22 cm
2800
2400
12 to 24 cm
3100
15 to 32 cm
3600
4.2
SETTING THE POWER
Press + or - to adjust the power from 1 to 9 then
P (4.2.1) (P=maximum power).
When switching on, you can move directly to
maximum power P by pressing the - button
(4.2.2).
For models
power (≤4.6kW) is distributed between the
different cooking zones. When a high power on
one burner is demanded, the power of the other
cooking zones is restricted, as shown below:
- Models
When maximum power is activated on a burner,
the power of the other burners may be
adjusted between 1 and 5 only.
When a burner is at power 9, the power of the
other burners may be adjusted between 1 and
7 only.
- Model :
When maximum power is activated on a burner,
the power of the other burners may be
adjusted between 1 and 4 only.
When a burner is at power 9, the power of the
other burners may be adjusted between 1 and
5 only.
When a burner is at power 8, the power of the
other burners may be adjusted between 1 and
6 only.
4.3

SETTING THE TIMER

Each cooking zone has its own timer which can
be adjusted up to 99 minutes. It can be used as
soon as the cooking zone concerned is turned on.
Press successively on
zone on which you want to apply
timer's LED is highlighted.
Then press + or - to set the time. It is possible
to directly access 99 minutes by pressing
the - key from the beginning (4.3.2).
When the cooking is finished, 0 is displayed and
a beep sounds for around 20 seconds. To
deactivate it, press any key.
To stop the timer manually, hold + and - down at
the same time or return to 0 using the - button.
, the total available
:
to select the cooking
the timer. The