Using In Windows Os - i-tec C31QUATTRODOCKPD Manual De Instrucciones

EN USB-C Quattro Display Docking Station with Power Delivery 85 W
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION
TO MACBOOK)
1. Turn on the MacBook and connect the power adapter to the docking station.
2. Connect the docking station power adapter to the AC 110 V / 230 V network
and press the ON button.
3. Connect the USB-C cable to the USB-C port on the back panel of the docking
station.
4. Connect the other end to the free USB-C port of your MacBook.
5. Subsequently, automatic port installations are started.
6. After the installation is complete, restart the MacBook.
INSTALLING DRIVERS IN OTHER OPERATING SYSTEMS
For Android, Chrome OS and Ubuntu, use the DisplayLink chipset drivers. These
are available for download on our website www.i-tec.cz/setup on the "Download"
tab of this product or here: http://www.displaylink.com/downloads.
CONNECT THE HDMI / DISPLAY PORT MONITOR
Use an HDMI / DP cable to connect the monitor to the docking station. During the
installation of an additional monitor, the laptop / tablet monitor may may blink,
this is a normal state. The docking station offers a graphic interface: 2x Display
Port and 2x HDMI
A remark for macOS and monitors with two DP cables:
Some displays with the resolution higher than 4K require two Display Port cables
for the image transfer in full resolution:
• Dell UP2715K 5K 27­inch monitor is supported at iMac (Retina 5K, 27­inch,
the end of 2014) or newer and at Mac Pro (the end 2013) with OS X Yosemite
10.10.3 or newer.
• HP Z27q 5K monitor is supported at iMac (Retina 5K, 27­inch, the end of
2014) or newer and at Mac Pro (the end of 2013) with macOS Sierra.

USING IN WINDOWS OS

In the hidden icons on the Start bar, click on the network connection icon:
10
Here you can choose:
a) DisplayLink Manager
b) Audio settings
c) Advanced Configuration