Frequently Asked Questions - Eminent Powerline Mini Serie Manual De Usuario

3. Click the 'Privacy' tab.
4. Enter the secret network name in the 'Private Network Name' field.
5. Click 'Set Local Device', right of the center of the screen.
6. The 'Powerpacket Utility' will indicate that the network name has been set.
7. Click 'OK'.
8. You can now check to see if there is a connection with the other adapters in the
Powerline Mini home network.
9. Click the 'Main' tab.
10. All Powerline Mini adapters in your home network will now be visible and
connected.
Option 2: The new Powerline Mini is connected to another device, such as a game
console.
1. Use the computer on which the software has already been installed, or install the
software as shown in chapter 3.2
2. Click 'Add' on the bottom right of the screen.
3. You do not need to enter anything in the 'Device Name' field.
4. Enter the 'DEK key / Device ID' of the new Powerline Mini in the 'Password' field.
5. Click 'OK'. The new Powerline Mini will now be added.
6. Click the 'Privacy' tab.
7. Check the 'Private Network Name'. Enter the name again if needed.
8. Click 'Set All Devices', right of the center of the screen.
9. The message 'Devices were all added to your network' appears.
10. Click the 'Main' tab.
11. All Powerline Mini adapters in the home network will now be visible and
connected.
12. Your new Powerline Mini has now been added to your Powerline Mini network,
and secured.

4.0 Frequently asked questions

Q. My network is slow and unstable, what could be the cause?
A 1. Make sure all adapters are directly connected to a wall-outlet. Use of extension
cords or multiple connector boxes can severely influence the quality of the
network. We especially discourage the use of connector boxes that are equipped
with over-voltage protection.
A 2. The signal depends on the age of the power grid in your house. The type of
current meter can also be of influence, for instance because of built-in filters.
A 3. If your house or office has three power phases the reception between the three
different phases may be rather weak. In most situations the communication
between the phases will be no problem. A three phase network can be
recognized by the three main switches in the meter cupboard.
13 |
ENGLISH