HANDELD IRON
recommended to warp the cord safely around the steamer to store in an
upright position.
-
We recommend you store the garment steamer on a flat surface, such as
in a cupboard, until it is time to use it next.
TROUBLESHOOTING GUIDE
Problem
the steamer does not heat up
The steamer does not produce steam
Water spills from the water tank
The steamer is producing a loud hum-
ming or pumping sound
The steamer does not seem to be remo-
ving creases easily
Unsure when to use the fabric brush
Avoiding discolouring of metal accesso-
ries on the garment
Possible solution
Check main plug is inserted correctly.
Check power supply.
Check the water level and the water tank inlet co-
ver is properly covered.
Press the steam activation button harder.
Hold the steamer in an upright position.
Make sure water is not over the MAXIMUM level.
Make sure water tank inlet cover is properly clo-
Always use the steamer in an upright position as
per the operating instructions.
Check water level; if there is no water or it is low ,
refill the water tank.
Hold the steamer in an upright position and stretch
the fabric downward to ensure best results.
Use when steaming is to directly touch the fabric.
When steaming delicate fabric, such as silk to re-
duce the risk of water dripping onto the garment
while steaming.
Do not directly hover the garment steamer over
the metal accessories.
Use caution and steam around the metal acces-
sories.
sed.
23