ECG RM 995 SET Manual De Instrucciones página 24

INSTRUCTIONS FOR USE – BLENDER
The immersion blender is intended for preparing gravies, icings, soups, mayonnaises, children's dishes,
cocktails and milkshakes.
Before fi rst use:
Before using the blender for the fi rst time, fi ll the bowl half way with water, immerse the blade of the blender to
the bottom of the bowl and blend for several seconds. Rinse the entire attachment and bowl well afterwards.
1. Insert the ingredients into the
mixing bowl or another higher
kitchen container. Do not use the
blender to crush ice, cut nuts or
other hard food.
2. Place the removable attachment on
the motor until it "falls" into place.
3. Uncoil the entire cord and plug into
the outlet.
GB
4. Insert the appliance into the mixing
bowl containing food and press the
desired speed button on the upper
part of the appliance body. Blend in
circular motions from the bottom.
5. Release the button to stop the blender. Unplug the power cord from the outlet after you are fi nished
blending.
Note: The maximum time for continuous operation of the appliance is 1 minute, let it rest for at least 3 minutes
prior to further use. Otherwise the appliance will overheat and become damaged.
INSTRUCTIONS FOR USE – CHOPPER
The chopper is designed to chop hard foods, like meat, cheese, onion, herbs, garlic, carrots, nuts, almonds,
plums etc. Do no chop very hard foods, like ice cubes, nutmeg, coff ee beans or grains.
Before fi rst use:
Carefully remove the plastic cover from the blade before using the appliance for the fi rst time. Attention: The
chopping blade is very sharp! Always hold it by the top plastic part.
1. Place the chopping blade on the shaft inside the chopping bowl. Push the blade down and lock the bowl.
Always place the chopping bowl safely on an anti-skid surface.
2. Put food into the chopping container.
3. Place the lid on the chopping container.
4. Place the body of the appliance (the part
with motor) on the lid of the chopping
container until it snaps into place.
5. Press button to start the operation of
the appliance. During the chopping
process, hold the appliance body with
one hand and the chopping bowl with
the other.
6. After you are fi nished, unplug the
appliance from the outlet and press the
button for replacing the attachments to disconnect the appliance body from the bowl.
7. Then remove the lid of the bowl.
8. Remove the chopping blade carefully and take out the processed foods.
24