Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTING TO POWER
Before switching on the unit, please make sure that the VOLTAGE selector is set to the voltage of your
area. Connecting the unit to other power sources may damage the unit.
AC Power Operation
Connect the AC power cord to your AC household mains outlet and switch on the mains supply. Make
—
sure the voltage is compatible.
Disconnect the power cord form the mains when not in use.
—
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands.
2. When planning not to use this unit for a long time, disconnect the power cable from the wall outlet.
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to avoid
shock risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC cord set completely. Open the battery compartment door and insert 6 pieces UM-2
"C" size batteries into the battery compartment with battery polarity as shown inside the battery
compartment.
RADIO OPERATION
1. Slide the FUNCTION switch to RADIO position.
2. Slide the BAND switch to AM or FM position.
3. Turn the TUNING control to your desired radio station.
4. Adjust the sound level by rotating the VOLUME control.
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit has a
built-in antenna, turn the whole unit for best reception.
STEREO HEADPHONE JACK
For private listening, insert the plug of a stereo headphone into the phones jack and adjust the VOLUME
control accordingly. During the use of a headphone, the speakers are automatically disconnected.
CD/MP3/USB OPERATION
Playing Audio CDs
1.
Set the FUNCTION switch to CD/USB position.
2.
Press the CD/USB button to select CD mode, CD icon will appear on the LCD display.
3.
Insert a CD disc in the CD compartment and close the CD door, the unit will start reading the disc, it
will show the total number of tracks of the entire disc after reading.
4.
Press the
button to start playing the disc.
5.
During playing, press the
again.
Playing MP3 Discs
1.
Set the FUNCTION switch to CD/USB position.
2.
Press the CD/USB button to select the CD mode, CD icon will appear on the LCD display.
button to temporarily pause playing. To resume, press the
button
P-3
Publicidad
