JB Systems Light ILEAD CONTROLLER Manual De Instrucciones página 6

ENGLISH
SELECT THE FIXTURES YOU WANT TO CONTROL
 Press SCANNERS button
 You can choose one or more than one fixtures by pressing the 1~12 buttons
 When the buttons' LED ( 1 ~ 12 ) are lit, you can control the fixtures.
 To select fixture 13~24, press SCANNERS to next page, the lower LED will be
on.
Upper 1 2 3 4 5
Lower 13 14 15 16 17
You will see the button's LED turned on when you select it. When the LEDs above the buttons are lit,
you can control the fixtures using joystick or control sliders. To exit control of a fixture, press the number
buttons again so the buttons LED light goes out. You can control multiple fixtures at same time. To
select multiple fixtures, press the button of each fixture one by one.
SETTING PAN/TILT POSITION
Move joystick Left/Right to control the Pan movement, Up/Down to control the Tilt movement. You can
also use the Speed slider and X-Fade/Value slider to control Pan or Tilt movement of the fixture.
SETTING MOVEMENT
 Select the fixtures you want to control
 Press MOVEMENT button
 Select preset Movement patterns by pressing 1~12 buttons, and use the X-
Fade/Value slider to adjust movement range
 Press MOVEMENT again to return to Program mode
 12 preset Movement patterns are as below:
1 2 3
Movement
When programming, you can select a movement pattern to create a scene. Use the Speed slider to set
pan movement range, and use the X-Fade/Value slider setting tilt movement range. On the other hand,
use Joystick to set the position of movement. When in Light show mode, you can use the Speed slider
to set running time within the range of 0.1 second to 5 minutes, and use X-Fade /Value slider to set
fade time.
JB SYSTEMS 7/71
®
OPERATION MANUAL
6 7 8 9 10 11 12
18 19 20 21 22 23 24
4 5 6 7 8 9 10 11
iLEAD Controller
ENGLISH
SETTING SHUTTER
24 shutter values have been programmed into the controller, which you can select by pressing the
relevant button (1 ~ 24) as showing below:
1
Open
Upper Blackout
13 14
Lower Shaking Shaking Shaking Shaking Shaking Shaking Shaking Shaking Shaking Shaking Shaking Open
SETTING GOBO
The Gobos setting are as below:
7 Gobos
12
Uppe
r
Low
er
14 Gobos
Uppe
r
Low
er
JB SYSTEMS
 Select the fixtures you want to control
 Press SHUTTER button
 Select a shutter value with the 1~12 buttons, or use the X-Fade/Value slider
 To select strobing speed 13~24, press SHUTTER again to next page the lower
LED will be on.
2 3 4 5 6 7
Slow Strobe Strobe Strobe Strobe
Strobe 1 2 3 4
15 16 17 18 19
 Select the fixtures you want to control
 Press GOBO button
 Select a gobo value with the 1~12 buttons, or use the X-Fade/Value slider
 To select gobos 13~24, press GOBO again to next page, the lower LED will be
on.
1 2 3 4 5 6 7
Gob Gob Gob Gob Gob Gob
Ope Ope
o o o o o
n n
1 1 2 2 3
13 14 15 16 17 18 19
Gob Gob Gob Slow Scro Scrol Scro Scro
o o o scrol ll l ll
6 6 7 l 1 2 3
1 2 3 4 5 6 7
Ope Gob Gob Gob Gob Gob Gob Gob
n o o o o o o
1 2 3 4 5 6
13 14 15 16 17 18 19
Gob Gob Gob Slow Scro Scrol Scro Scro
o o o scrol ll l ll
12 13 14 l 1 2 3
8/71
®
OPERATION MANUAL
8 9 10 11 12
Strobe Strobe Strobe Strobe Fast
5 6 7 8 Strobe
20 21 22 23 24
8 9 10 11 12
Gob Gob Gob Gob
o o o o o
3 4 4 5 5
20 21 22 23 24
Scro Scro Scro Fast
ll ll ll ll scrol
4 5 6 7 l
8 9 10 11 12
Gob Gob Gob Gob
o o o o o
7 8 9 10 11
20 21 22 23 24
Scro Scro Scro Fast
ll ll ll ll scrol
4 5 6 7 l
iLEAD Controller