Removing/Replacing The Spacer; Cleaning And Care - lidl KH1919 Instrucciones De Uso

Removing/replacing the spacer

• To replace it, place the spacer
fi rmly.
• To remove it, pull the spacer
• To protect the shaver area
pliance, remove the spacer 3 and, in replacement, fi t the protective
cap on the shaver area 4. Ensure that the elevations on the inner edge
of the protective cap do not grip into the grooves on the edge of the
shaver area 4. Otherwise, the protective cap will not hold.

Cleaning and care

Emptying the catchment container
• Pull the catchment container
• Empty out the textile remains.
• Replace the catchment container
3 on the cutting head and press it
3 downwards.
4 you should, if you are not using the ap-
5 off straight to the rear.
5 so that it is seated fi rmly.
- 60 -