Brandani BH3381 Manual De Instrucciones página 10

5. After the above mentioned five steps, the unit is ready for use now. Connect it to power
source and turn on the unit. If it runs normally, you can start to make the juicer.
6. To disassemble the unit for cleaning follow the steps in a reverse order.
HOW TO USE THE JUICER EXTRACTOR
1. Wash fruits & vegetables cleanly.(peel skin when necessary), cut them into a proper blocks or
pieces .Place a juice cup or other container right under the juice outlet.
2. Connect the unit to power source and operate the control switch.
3. Place foods in the food chute and press lightly with pusher, Do not use your fingers as pusher.
Extracted juice will run out from the juice outlet into the juice cup. If the dregs container is
full, Unplug and clean it out.
4. After juicing, turn the switch to "0" , then unplug it. Completely clean all parts before you
store it.
CAUTIONS
1. Do not immerse motor base, power cord or plug in water or other liquids,or performance
may be impaired by moisture.
2. Unplug the unit before assembly, disassembly or cleaning .
3. Do not use this unit outdoors.
4. The extractor has two operational Speed 1 is extracting soft foods such as strawberry, grap, pineap-
ple, watermelon or tomato, etc. while Speed 2 is for hard foods such as apple, carrot or pear, etc.
10