Descargar Imprimir esta página

Lenco DAR-045 Manual Del Usuario página 14

Radio dab+/fm con reproductor de cd y bluetooth

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

No power
Ensure that the mains cable is securely connected.
Ensure that the unit is switched on.
The remote control does not function
Use the remote control near to the unit.
Point the remote control at the remote control sensor on the unit.
Replace the batteries in the remote control with new ones.
Remove any obstacles between the remote control and the unit.
The unit does not respond when pressing any buttons.
Remove the batteries (when inserted) and remove the powercord for a minute. Then reinsert the batteries.
No sound output
Turn up the volume with VOL+.
I can't find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing
Ensure that the unit is switched on.
Ensure that the Bluetooth function is activated on your Bluetooth device.
The unit has a Bluetooth function that can receive a signal within 10 metres.
Disc in place but the unit won't play
Ensure that the disc label is facing up.
Ensure that the disc is clean.
PAUSE mode may be activated, deactivate it.
Disc may be damaged or dirty; check and clean the disc.
DAB+/FM reception
Ensure the antenna wire is fully extended.
Electrical interference in your home can cause poor reception. Move the unit away from them (especially those with motors and
transformers).
The unit switches off automatically during play
Increase the volume level of your connected sound source (DVD player/TV etc.)
Sound interference coming from the speakers in Speakers
Move any wireless devices (mobile phone, bluetooth device etc.) away from the unit.
Trouble Shooting
14

Publicidad

loading