Erreka ROC Serie Manual De Instrucciones página 16

Electrical connection
Brake placement
Connect the brake kit to the back part of the motor. Make sure the motor axis coincides with the groove in the brake disk. Fasten it down with the subjection
screws.
Connect the two wires of the brake to the stroke end (see electrical connection section).
Take the two plastic caps off.
Colocación del bimotor
Take away the base cover and connect the second motor reducer (fasten it with the screws).
Connect the second motor reducer to the stroke end parallel with the first.
Turn 2
Turn 1
General
Condenser
Break
16
Electric supply wire
Black Motor
Brown Motor
Blue Motor