Bien-Air Dental DMX-Standard Instrucciones De Uso página 18

Description Diagram Specification
ref.
DMX-Standard REF 1500412-001
Voltage Input- 32 Vdc +/- 10%
24 Vdc +/-10%
Speed reference Input 0 to 5 Vdc (linear
or logarithmic)
MUX IN motor Input 0 or 5 Vdc (TTL)
Rotation (CW/CCW) Input 0 or 5 Vdc (TTL)
Brightness Input 0 to 5 Vdc
(16 output levels)
Torque limiting Input 0 to 5 Vdc
Auto-reverse Input 0 or 5 Vdc (TTL)
Auto-forward Input 0 or 5 Vdc (TTL)
Auto-forward duration Input 0 to 5 Vdc
Pneumatic pressure Input 0 to 3 bar (0 to 300 kPa,
reference 14.5 to 43.5 psi)
Motor Power Output Phases A, B, and C
Motor Light Output L+ / L-
MUX OUT motor Output 24 Vdc, Max. current = 100mA
EV1 Out Output 24 Vdc, Max. current = 100mA
EV2 Out Output 24 Vdc, Max. current = 100mA
EV3 Out Output 24 Vdc, Max .current = 100mA
RS-232 Digital interface
RS-485 Digital interface
Voltage converter REF 1500580-0011
Voltage Input 22 to 27 Vac or 22 to 37 Vdc
Voltage Output 24 Vdc (24W peak / 12W cont)
Voltage Output 32 Vdc (130W peak / 60W cont)
Description
Notes
Dual Motor Switch REF 1500554-001
IN motor
Pull-down Input
Pull-down Input MUX control
Pull-down Input EV In
Pull-up Input OUT motor 1
Pull-up Input
Pull-down Input OUT motor 2
Pull-down Input
Pull-up Input
EV1 Out
EV2 Out
Operating mode selection by DIP-Switches
The 8 DIP-Switches are used to configure the system, and in particular to
select the
technical support, please contact your Bien-Air Dental dealer.
DIP-Switches
1
Full-duplex or
half-duplex
DIP Switch 1: Not used (except in serial mode, description available on request)
DIP Switch 2: Not used (except in serial mode, description available on request)
DIP Switch 3: Activates/deactivates sending of status signal
Diagram Specification
ref.
Input 3 motor phases: A, B, C
(Max. current = 6A)
2 light connections L+, L-
(Max. current = 3A)
Input 24 Vdc, 200mW
Input Solenoid valve input (24 Vdc)
Output 3 motor phases A, B, C
(Max. current = 6A)
2 light connections
Output 3 motor phases: A, B, C
(Max current = 6A)
2 light connections
Output Motor 1 solenoid valve output (24 Vdc)
Output Motor 2 solenoid valve output (24 Vdc)
operating mode (see table below). For more information and
2 3 4 5
Function
(except in serial mode)
Notes
Max. relay current
Max relay current
Max. relay current
Max. relay current
6 7 8
Mode OFF: RS232
ON: RS485
16 16