Twin Star 23WM374 Manual De Instrucciones página 6

K
Right
Back
Panel
I
O
Shelf
Pins
Screw
J
P
J
Left
Back
Panel
8. Locate Left Back Panel (J), attached to the
left back of the completed assembly from
step 6, using a Phillips Head screw driver,
screw screws (Q) through the pre-drilled
Q
holes in the Left Back Panel to the com-
pleted assembly.
Locate Right Back Panel (K), attached to
the right back of the completed assembly
from step 6, using a Phillips Head screw
driver, screw screws (Q) through the pre-
drilled holes in the Right Back Panel to the
completed assembly.
Locate Center Back Panel (P), attached to
the center back of the completed assembly
from step 6, using a Phillips Head screw
driver, screw screws (Q) through the pre-
drilled holes in the Center Back Panel to
the completed assembly.
Remove Shelf Pins (O) from bag. Choose
9.
desired height of Shelf (I) and place the
four Shelf Pins (O) into same height shelf
holes inside side Panels. Insert Wood
Shelf (I), allow Wood Shelf (I) to rest
on the Shelf Pins (O).