Connections - Nevir NVR-7400-32HD-N Manual De Instrucciones

Getting Started

Connections

Connector
SIDE AV
SIDE AV
HEADPHONE
NOTE: When connecting a device via the YPbPr or Side AV input, you must use the supplied connection cables
to enable connection. See the illustrations above.
signal via VGA input. |You cannot use VGA and YPbPr at the same time. |
SIDE AV CONNECTION cable's WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV
will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode,
output will not be available via the scart socket. | When using the wall mounting kit (optional), we recommend that you plug
all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module only when the TV is
SWITCHED OFF. You should refer to the module instruction manual for details of the settings.
02_MB82_BASIC_[GB]_1900UK_PVR_DVBT-C_NICKEL22_32189LED_BMS_10086716_50257847.indd 20 02_MB82_BASIC_[GB]_1900UK_PVR_DVBT-C_NICKEL22_32189LED_BMS_10086716_50257847.indd 20
Type Cables
Scart
Connection
(back)
VGA
Connection
(back)
PC/YPbPr
Audio
Connection
Side Audio
(side)
YPbPr or PC Connection Cable
(Not supplied)
HDMI
Connection
(back)
SPDIF
Connection
(back)
Side AV
(Audio/Video)
Connection
(side)
(Not supplied)
Headphone
Connection
(side)
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable (Not supplied)
USB
Connection
(side)
CI
Connection
(side)
| You can use YPbPr to VGA cable (not supplied) to enable YPbPr
English - 20 -
Device
To enable PC audio, you will need to use the
16.08.2013 15:02:29 16.08.2013 15:02:29