iCES ICR-240 Manual De Instrucciones página 7

Note:
• You must make the time and alarm time adjustments while the display is
flashing. The display will stop flashing after approximately 10 seconds if
adjustments are not made.
• If two alarms are set together, for example alarm1 set to buzzer alarm and
alarm2 set to radio alarm, when the buzzer is activated by alarm1 and radio is
activated by alarm2, the previous alarm does not stop automatically and has
both the buzzer and radio sound together.
RADIO
General Operations
1. Press the "ON/OFF/NAP" button (2) to turn the radio on and off.
2. For manual tuning, press the "HOUR / TUNING –" button (5) or the "MIN /
TUNING +" button (9) for increments of 0.1mHz.
3. For automatic tuning, press and hold down the "HOUR / TUNING –" button (5)
or the "MIN / TUNING +" button (9) for approximately 3 seconds. Depress the
button and the radio will start to scan for the next available station.
4. Press the "ALARM 1 / VOL –" button (4) or the "ALARM 2 / VOL +"button (8)
to adjust the volume level. The display changes to show the volume level
indication (00 to 14) during the volume adjustments, then changes back to
the radio station frequency and then to the current time.
5. Press the "HOUR / TUNING –" button (5) or the "MIN / TUNING +" button (9)
to show the radio station frequency.
Pre-set Station Memory
1. The radio can store up to 20 FM stations.
2. To store a station in the memory, tune to the desired radio station. Press and
hold down the "TIME/PRESET" button (6) for approximately 3 seconds and
"P01" on the display will flash. Press the "P+" button (7) or "P-" button (3) to
the desired station memory (P01 to P20). Press "TIME/PRESET" button (6)
once to confirm.
3. Repeat the above steps for up to 20 stations.
4. To recall the station, press the "P+" button (7) or "P-" button (3) until the
desired station is reached.
Sleep Mode
1. When the radio is on, press the "SNOOZE / SLEEP / DIM" button (1) to enter
the sleep mode. "OFF" will be displayed. Press the "SNOOZE / SLEEP / DIM"
button (1) repeatedly for the duration of the "SLEEP" time. The range of
"SLEEP" time is 90 minutes to 10 minutes, as displayed on the screen.
6