General Information; Time Setting - Bresser MyTime Thermo-/Hygro Instrucciones De Uso

ABOUT THIS INSTRUCTION MANUAL
These operating instructions are to be considered a
component of the device. Please read the safety
instructions and the operating instructions carefully be-
fore use. Keep these instructions for renewed use at a
later date. When the device is sold or given to someone
else, the instruction manual must be provided to the new
owner/user of the product.
This product is intended only for private use.
GENERAL WARNINGS
CHOKING HAZARD!
Keep packaging material, like plastic bags and rubber
bands, out of the reach of children, as these materials
pose a choking hazard.
RISK of ELECTRIC SHOCK!
This device contains electronic components that operate
via a power source (batteries). Children should only use
the device under adult supervision. Only use the device as
described in the manual; otherwise, you run the risk of an
electric shock.
RISK of FIRE/EXPLOSION!
Do not expose the device to high temperatures. Use only
the recommended batteries. Do not short-circuit the de-
vice or batteries, or throw them into a fire. Excessive heat
or improper handling could trigger a short-circuit, a fire or
an explosion!
NOTE!
Do not immerse the unit in water.
Do not subject the unit to excessive force, shock, dust,
extreme temperature or high humidity, which may result in
malfunction, shorter electronic life span, damaged batter-
ies and distorted parts.
Do not disassemble the device. In the event of a defect,
please contact your dealer. The dealer will contact the
Service Centre and can send the device in to be repaired,
if necessary.
Use only the recommended batteries. Always replace
weak or empty batteries with a new, complete set of bat-
teries at full capacity. Do not use batteries from different
brands or with different capacities. Remove the batteries
from the unit if it has not been used for a long time.
The manufacturer is not liable for damage related to im-
properly installed batteries!
6

GENERAL INFORMATION

This item is available in the different variants. The func-
tions and technical data are the same. They only differ in
its design/in its colour.
SCOPE OF DELIVERY
Wall clock, Instruction manual
Required batteries: 1 x 1.5V battery (Size AA/LR6)
Batteries not included with purchase.
PARTS OVERVIEW
Wall clock (Fig. 2)
1. Dial plate
2. Clock hands (hours, minutes, seconds)
3. Humidity display (indoor)
4. Temperature display (indoor)
5. Wall mount
6. Battery compartment
7. RESET button
8. REC button
9. M.SET button
10. Locking pin
GETTING STARTED/POWER SUPPLY
1. Remove the locking pin (10) from the clockwork.
The clock can be operated only after the pin has
been removed.
2. Insert one battery (1.5V, AA/LR6) into battery com-
partment (6).

TIME SETTING

NOTE!
After the clock received the DCF time signal the time will
be set according to the Central European time (CET).
Summer and winter time change (and reverse) is also
set automatically.
Automatic time setting via DCF time signal
After inserting the battery the time will be set auto-
matically via DCF signal. This process may take a few
minutes. During this process the clock hands will turn
several times with interruption until they will display the
right time.
Initiate to receive the DCF time signal manually
NOTE!
Use this function when e.g. automatic summer/winter
time change does not work or the wall clock temporarely
receives no time signal.
1. Press and hold the REC button (8) for 3 seconds to
start manual search for the DCF signal.
(Fig. 1)