Standard Accessories; Prior To Operation - Metabo CM 4ST Instrucciones De Manejo

PRECAUTIONS ON USING CUTTER
1. Do NOT use any cutting tool other than a diamond wheel.
2. Don't use it for cutting of metallic materials. Diamond
wheel may be broken or its service life may be remarkably
reduced when it is used for cutting of metallic materials .
Be sure not to use the wheel for cutting of metals.
3. Be sure to take an earth leakage breaker or isolating
transformer as electric shock-preventive measures.
4. Pour on water while cutting or scribing concrete, tile or
stone.
5. Keep the motor interior free of water.
6. Wear protective glasses to protect your eyes while
cutting.
SPECIFICATIONS
Voltage (by areas)*
Power Input*
No-Load Speed
Max. cutting depth
Diamond wheel
Weight (without cord)
* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

Wrench .............................................................................. 2
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
1 Diamond Wheel
A Type
Diameter
A (Dry)
Blade
type
B (wet)
2 Water Plug (with machine screw)
3 Rubber Connector
4 Vinyl Hose
B Type
Hole
Thickness
diameter
(mm) (mm)
(mm)
106 20
110 20
7. Prior to use, be sure to check the diamond wheel in such
details as crack, broken part, bent part and the like. Don't
use a diamond wheel if any of the above detect is found
on the wheel. Also confi rm that no abnormality exists by
actual test running.
8. Proceed with cutting operation when full speed has been
reached.
9. Do NOT apply excessive force.
10. When cutting concrete, tile, or stone, the maximum
cutting depth should be held to within 20mm.
11. Never touch diamond wheel while operating.
12. Never lay down the cutter while the diamond wheel is
revolving.
13. Exercise care to position the cutter at a safe, stable spot
when cutting.
14. Take good care of the power tool and keep it clean.
(127 V, 220 V)
13000 min
34 mm (wheel dia. 110 mm)
31.5 mm (wheel dia. 105 mm)
110 mm external dia. × 20 mm internal dia.
2
Optional accessories are subject to change without notice.
APPLICATIONS
○ Cutting and scribing of concrete.
○ Cutting and scribing various types of stones.
○ Cutting and scribing various types of tiles.

PRIOR TO OPERATION

1. Confi rming the earth leakage breaker or isolating
transformer
Before using this Cutter, confi rm that an earth leakage
breaker or isolating transformer as electric shock
preventive measures is installed at the power supply to
which the Cutter is connected.
2. Power source
Ensure that the power source to be utilized conforms
to the power requirements specifi ed on the product
1.2
nameplate.
3. Power switch
1
Ensure that the power switch is in the OFF position. If the
plug is connected to a receptacle while the power switch
is in the ON position, the power tool will start operating
immediately, and can cause serious injury.
4. Extension cord
When the work area is far away from the power source,
use an extension cord of suffi cient thickness and rated
capacity. The extension cord should be kept as short as
practicable.
1300 W
(/min)
–1
2.9 kg
3 4
English
5