ECG KT 12 Manual De Instrucciones página 28

not insert the plug into the outlet, regulate and clean the appliance or
perform user's maintenance. Children shall not play with the appliance.
WARNING – Some parts of this product can become very hot and cause
burns. Special attention has to be paid in the presence of children and
handicapped people.
OPERATING INSTRUCTIONS
When you first turn the ceramic heater on, you may detect a slight odour. This is not a malfunction. This is
common with most heaters, it is harmless and it disappears in a little while, after dust or grease residue, which
settled there after a longer period of inactivity or during the manufacturing process, burns off.
Controls
While observing the above safety instructions, plug the heater in a suitable electrical outlet and switch it on.
GB
Functions switch
Position Functions
O Off
I Low heating output
II High heating output
Low power of heater with rotation
High power of heater with rotation
Thermostat function
Set higher temperature by turning it clockwise.
Using the device for heating
1. Turn the functions switch to „I" position for lower output, or to „II" for full heating output.
2. Turn the thermostat control to set the desired temperature. Turning counterclockwise will lower the
temperature, turning clockwise will increase the temperature.
3. When the set temperature is reached, the thermostat will switch the heater off and when the temperature
drops below the set level, it will switch it on again.
4. To achieve maximum heating output, turn the switch to „II" and turn the thermostat control fully to the
right.
5. To evenly distribute the heat around the room, set the function switch to position
heating or to position
Overheating
• The device will be switched off by internal thermal fuse in case of overheating.
• Overheating could be caused by covering the ventilation openings on the rear of the appliance or by
covering the grill in front. When that happens, unplug the appliance from the outlet and let it cool for
30 minutes. Remove all obstacles and switch the appliance on again.
• If the device stops working, the likeliest cause is a blown fuse. Please, contact an authorized service center.
Safety switch in case of overturning
• The ceramic heater is equipped with a safety switch that in the event of overturning of the heater switches
it off automatically.
28
for high power heating.
for low power