ECG KT 10 Manual De Instrucciones página 30

to 8 years old may not insert the plug into the outlet, regulate and
clean the appliance or perform user's maintenance.
WARNING: This heater is not equipped with a device for measuring the
CAUTION: Some parts of this product can become very hot and cause
GB
OPERATING INSTRUCTIONS
When you first turn the ceramic heater on, you may detect a slight odour. This is not a malfunction. This is
common with most heaters, it is harmless and it disappears in a little while, after dust or grease residue, which
settled there after a longer period of inactivity or during the manufacturing process, burns off.
Controls
While observing the above safety instructions, plug the heater in a suitable electrical outlet and switch it on.
Functions switch
Position
OFF
FAN
I
II
Using the device as a fan
1. Turn the functions switch to FAN position. The fan will blow air into the room at room temperature.
2. If the fan does not switch on, that means that the temperature in the room is lower than was set as
a switching off temperature for the built-in thermostat. Turn the thermostat control clockwise, until the
fan starts.
3. Once the fan starts, the LED indicator on the front of the device will light up.
30
Do not immerse in water!
room temperature. Do not use the heater in small rooms
occuppied by individuals that are not capable of leaving
the room without assistance, unless proper supervision is
available.
burns. Special attention has to be paid in the presence of
children and handicapped people.
DO NOT COVER!
WARNING: To prevent overheating, do not cover
the heater.
Functions
Off
Only fan, heating off
Low heating output
High heating output