Audio Settings; Other Settings - JVC KD-X472DBT Manual De Instrucciones

Audio Settings

Select a preset equalizer directly
Press repeatedly.
(or)
Press , then turn the volume knob within 5 seconds.
Preset equalizer:
[FLAT] (default)/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/[POP]/
[R&B]/[USER]/[CLASSICAL]
• Drive equalizer ([DRVN 3]/[DRVN 2]/[DRVN 1]) boosts specific frequencies in the audio signal
to reduce the noise heard from outside the car or running noise of the tyres.
Store your own sound settings
1
Press and hold to enter [EASY EQ] setting.
2 Turn the volume knob to select an item, then press the knob.
Refer to [EASY EQ] (page 25) for setting and the result is stored to [USER].
• To return to the previous setting item, press
• To exit, press .
24
ENGLISH
(for KD-X172DB)
(for KD-X172DB)
.

Other settings

1 Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
[EQ SETTING]
[PRESET EQ] Selects a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].
[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/
[POP]/[R&B]/[USER]/[CLASSICAL]
Drive equalizer ([DRVN 3]/[DRVN 2]/[DRVN 1]) boosts specific frequencies
in the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
• When the display demonstration is activated ([ON] is selected initially,
page 6), [HARD ROCK] is automatically selected as the [PRESET EQ].
– If you set [DEMO MODE] to [OFF] (page 6), [FLAT] is selected as the
default setting for [PRESET EQ].
.
Default: [XX]