Operator Obligations; Basic Safety Instructions - Ega Master 79921 Manual De Instrucciones

However there is still a risk of accidents to the operator or third parties or damage to the machine or other objects.
All current regulations and specifications which apply to the site of operation in regards to accident prevention,
installation of electrical and mechanical systems as well as radio interference must be observed.
IMPORTANT - The operator must make sure that...
• risk assessment is carried out for the specific risks, which can occur due to any operation of the machine.
• the function of the safety equipment is regularly checked.
• the safety symbols and safety notes on the machine/ device and the operating instruction booklet are observed.
• the safety instructions and the operating instruction booklet are available completely and in legible condition on
site with the machine.
The operator is obliged to only allow personnel to work on the machine who:
• are familiar with the basic work environment safety rules and accident preventing regulations. Also, those
persons must have been instructed in the correct use of the machine.
• have read and understood the safety and warning notes in the operating instruction booklet as well as all other
documentation pertaining to the machine.
• have been tested at regular intervals in regards to their safety-conscious operation of the machine.
Safety-conscious working
Additional to the safety instructions in this manual and the intended use, the following safety regulations have to be
observed:
• Accident prevention instructions, safety and operation regulations
• Explosion protection directives
• Safety regulations for the operation with hazardous material
• Standards and laws being effective
All persons who are assigned to work with the machine are obligated to:
• always pay attention to the basic safety and accident preventing regulations.
• always read and follow the safety and warning notes in the operating instruction booklet.
Before working on or with the tool, read the safety instructions and follow the instructions during operation.
Do not modify machine or machine tools and accessories after receipt. Permission from the manufacturer must be
obtained under observance and adherence of all safety instructions before any modifications or alterations.
Use the machine only for its intended use. Observe the technical data of the equipment and the ambient
temperatures.
The manufacturer machines are only designed for commercial/ industrial use. Use only the manufacturer genuine
parts and accessories.
Pay attention to labels, restrictions of use and special instruction notes on the machine tools and the machine itself.
Regularly check that the type plate and symbols on the machine are legible. If necessary, contact the manufacturer to
replace them.
Only operators with technical knowledge, trained by authorized responsible technical personnel may install, adjust,
operate, transport and store the machine.
Disassembly and assembly work as well as maintenance and service may only be carried out by the manufacturer or
qualified personnel.
Operate and maintain the machine as described in the operating instruction booklet.
Select, maintain and replace the wear parts and machine tools as described in the operating instruction booklet of the
machine.

OPERATOR OBLIGATIONS

BASIC SAFETY INSTRUCTIONS

21