Ethernet Communication - General Measure M02 Manual De Usuario

M02 Digital Indicator

7 Ethernet communication

M02 digital indicator can connect with RJ-45 cable to communicate with host
computer or PLC by Ethernet port.
User need set IP address in F3 working parameters. For example, if IP is
192.168.101.106，then input 192 at F3.1，input 168 at F3.2，input 101 at F3.3，input
106 at F3.4；input port no. at F3.5
After cable connected, orange light is bright for good communication and green
light is sparkle in communication. The DATA light will sparkle in Modbus/TCP
communication and will be off if the communication is broken.
9