DeWalt DXSTAH025 Manual De Instrucciones

JS PRODUCTS | 6445 MONTESSOURI STREET, LAS VEGAS, NV 89113
(AUG18) Part No. 41562
Copyright © 2018 D
D WALT and the D WALT Logo are trademarks of the D
®
E E
and are used under license. The yellow/black color scheme is a trademark for D
power tools & accessories.
Definitions: Safety Guidelines and Words
This instruction manuals use the following safety alert symbols and words to alert you
to hazardous situations and your risk of personal injuery or property damage.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided,
may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D
CALL US TOLL FREE AT: 1-844-377-8451
WARNING! Read and understand all instructions.
important safety and operating instructions.
before assembling this storage rack and save it for reference.
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE YOU BEGIN:
• Read all instructions thoroughly.
• Remove all components from the box, and lay them on the floor in an orderly fashion.
• Wear eye protection.
• Be cautious of sharp edges.
• Do not stand on product. You may fall which may cause personal injury.
• 300 lb weight limit.
• Keep this information for further reference.
Seat Strut and Cushion Seat Instructions (Fig. 1-4)
1. Cushion Seat Strut Install (Fig. 1)
• Take the seat strut and install into the top of the upright frame. Be sure to center the seat strut correctly
when installing it and firmly push it in.
2. Cushion Seat and Base Assembly
• Take the base and put it on the bottom of the cushion seat. (Fig. 2)
• Use the (4) Phillips pan head bolts to install the base to the cushion seat. (Fig. 3)
®
3. Cushion Seat and Base Install (Fig. 4)
• Slip the cushion seat and base onto the seat strut.
• Firmly push down the center of the cushion seat to secure it to the seat strut.
FIG. 1 FIG. 2
SEAT STRUT
BASE
UPRIGHT
FRAME
DXSTAH025 Copyright © 2018, D WALT
E
WALT.
E
WALT Industrial Tool Co., or an affiliate thereof
E
E
WALT TOOL,
E
This manual contains
Please read this manual carefully
FIG. 3
CUSHION
CUSHION
SEAT
SEAT
(4)
(4)
PHILLIPS ®
PHILLIPS ®
PAN HEAD
PAN HEAD
BOLTS
BOLTS
FIG. 4
Foot Assembly Instructions (Fig. 5-7)
1. Caster Removal (Fig. 5)
• Begin by loosening the nuts on the top of the casters. Holding the top of the caster will assist with removal.
• Once the nut is free, take it off along with the lock washer and flat washer.
• Repeat for the remaining 3 casters.
2. Foot Test (Fig. 6)
• Slip the foot onto the frame.
• Using the hardware from the caster and the supplied bolt, attach the foot to the frame. Do not tighten all
the way at this point.
• Repeat for the remaining 3 legs.
• Place the stool on its 4 legs. Check to see if the stool is level. If it is, tighten all of the bolts to the feet. If
not, move on to step 3.
3. Level Adjustments (Fig. 7)
• Shims (3 included) will be used to make adjustments to level the stool. These shims are to be placed on
the legs before the foot installation if removing the casters. If the casters are not level, the same shims can
be placed at the bottom of the steel leg after the caster has been removed—be sure to align the shim
with the existing frame prior to the caster nut being tightened.
• In order to use a shim, disassemble the feet that require adjustments. Then, place a shim followed by the
foot, and bolt it together.
• Once more, check to make sure the stool is level. If not, repeat process.
FIG. 5
LEG
LOCK
WASHER
CASTER
Two Year Limited Warranty
D WALT stools are backed by a two year limited warranty. This warranty covers manufacturer defects and
E
workmanship. The warranty excludes misuse or abuse and normal wear and tear. Exclusion is not allowed in some
states and may not apply. This warranty gives you specific legal rights, and you may have other rights, which vary
from state to state. For further detail of warranty coverage, call 1-844-377-8451.
In addition to the warranty, D
90 Day Money Back Guarantee
WALT
If you are not completely satisfied with the performance of your D
within 90 days from the date of purchase with a receipt for a full refund – no questions asked.
Latin America
This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country
specific warranty information contained in the packaging, call the local company or see website for
warranty information.
JS PRODUCTS | 6445 MONTESSOURI STREET, LAS VEGAS, NV 89113
(AUG18)
D WALT ® et le logo D
E
société affiliée à cette dernière et sont utilisés sous licence. L'agencement de couleurs jaune et noir est une
marque de commerce des outlils électriques et accessorires D
Les définitions ci-dessous décrivent le niveau de danger pour chaque mot indicateur
employé. Lire le mode d'emploi et porter une attention particulière à ces symboles.
pas évitée, pourrait entraîner la mort ou des blessures graves.
évitée, pourrait entraîner des blessures légères ou modérées
(Si utilisé sans aucun terme) Indique un message propre à la sécurité.
AVIS : indique une pratique ne posant aucun risque de dommages corporels
mais qui par contre, si rien n'est fait pour l'éviter, pourrait poser des risques de
dommages matériels.
POUR TOUTE QUESTION OU REMARQUE AU SUJET DE CET OUTIL OU DE TOUT AUTRE
OUTIL D WALT, COMPOSEZ LE NUMÉRO SANS FRAIS: 1-844-377-8451.
E
Avertissement ! Lire et comprendre toutes les directives.
Ce manuel contient des consignes de sécurité et d'utilisation importantes.
Veuillez lire attentivement ce manuel avant d'assembler cette étagère de
rangement et le conserver à titre de référence.
AVANT DE COMMENCER :
• Veuillez lire attentivement toutes les instructions.
• Retirez tous les éléments de la boîte et placez-les sur le sol de façon ordonnée.
• Portez des lunettes de protection.
• Faites attention aux bords tranchants.
• Ne vous mettez pas debout sur le produit. Vous risqueriez de tomber et de vous blesser.
• Limite de poids de 300 lb (136 kg).
• Conservez ces renseignements pour consultation ultérieure.
Instructions pour le montant du siége et le siége á coussin (Fig. 1-4)
1. Fixation du montant du siége á coussin (Fig. 1)
• Prenez le montant du siège et fixez-le sur le châssis droit. Veillez à centrer correctement le montant du
siège lors du montage et à l'enfoncer fermement.
BASE
2. Assemblage du siége á coussin et de la base
• Prenez la base et placez-la en-dessous du siège à coussin. (Fig. 2)
• Utilisez les (4) boulons à tête cylindrique Phillips
CUSHION
SEAT
BASE
SEAT
STRUT
FIG. 6
LEG
NUT
NUT
LOCK
WASHER
FLAT
FLAT
WASHER
WASHER
FOOT
BOLT
WALT stools are covered by our:
E
WALT Stool for any reason, you can return it
E
Part No. 41562 DXSTAH025 Copyright © 2018, D
WALT sont des marques de commerce de DEWALT Industrial Tool Co. ou d'une
E
Définitions : Règles de sécurité
indique une situation potentiellement dangereuse qui, si elle n'est
indique une situation potentiellement dangereuse qui, si elle n'est pas
CONSERVER CES CONSIGNES
LIRE TOUTES LES CONSIGNES
pour fixer la base au siège à coussin. (Fig. 3)
®
FIG. 7
LEG
NUT
LOCK
WASHER
FLAT
WASHER
SHIM
FOOT
BOLT
WALT
E
WALT.
E
.