Publicidad
Idiomas disponibles
Idiomas disponibles
HP001BT
BLUETOOTH HEADPHONES
Bluetooth
10m
Calls
Play
· Connect your device to the headphone via Bluetooth(refer to the"Pair &
Connect"section).
· Open your favorite music app and press play.
· Control the music,track & volume from your device, or control the music
& volume from the touch screen(refer to the "touch function".
Press the Power button once to play/pause music & answer calls, press it
twice to redial the last number called on your phone,and press & hold it
to reject an incoming call.
· All audio,including music,games,videos,and notifications will be routed
through the headphone.
Touch Function
+
· Press&Hold
area (refer to product Diagram) to switch to nex track.
-
· Press&Hold
area (refer to product Diagram) to switch to previous track.
+
· Press
area (refer to product Diagram) to turn up the volume.
-
· Press
area (refer to product Diagram) to urn down the volume.
Toroubleshooting
No power:
Recharge your wireless bluetooth headphone using the micro USB cable.
Music is not playingover Bluetooth:
Make sure your Bluetooth device has A2DP profile. Check if both devices
are paired and connected over Bluetooth. Restart the headphone to
reconnect your Bluetooth device.
Bluetooth device will not reconnect with the headphone:
Navigate to your Bluetooth settings menu on your Bluetooth device, tap
"HP001BT", and select "Forget". Now follow the steps to pair your device again.
Or, press & hold the power button on the headphone (while powered on)
to disconnect the headphones from any connected devices. Then follow
the steps to reconnect your device.
User manual
Microphone
Stereo
Charging time 2,5 h
Charge It
· On the right earcup,carefully plug the micro USB cable into micro USB
charging port.and connect the other end of the cable to either a computer
USB port or to a USB-compatible car or wall charger.
· Solid red LED light will appear to indicate when the headphone is charging.
· When charging is complete, the LED light will turn blue.
· Charging time is approximately 2 hours.
Turn It On/Off
· Press & hold the power button on the right side of the headphone for about
5 seconds.
· The headphone will emit a beep,and a blue LED light will light to indicate
the headphone is turning on.
· To turn the wireless bluetooth headphone off,press & hold the power button
again for 5 seconds until the LED light turns off.
Pair & Connect With New Device
· Power on the wireless bluetooth headphone (refer to the "Turn It On"section).
· To pair the headphone with a new device,the blue LED light blink to indicate
it is ready to be paired with you device.
· On your Bluetooth-enabled smartphone,tablet or media player,navigate
to the Bluetooth settings menu,turn on the Bluetooth feature,and search
for new devices.
· After a few seconds you will see "HP001BT" listed.
· Tap this modei to select it.Solid blue LED light indicate your device has
successfully paired.
· With your previously paired device's Bluetooth turned on and in range,
The headphone will automatically reconnect to the last Bluettooth device
it was connected to.
NOTE: If the headphone is not used within 5 minutes,
the headphones will automatically turn off to save battery.
Product Diagram
Press & Hold (3 Sec): Power On / Off
Click Once: Play / Pause, Answer / End Calls
Double Click:R e-dial Last Dialed Phone Number
Press & Hold (1-2 Sec): Reject Incoming Call
Microphone
Next Track / Volume Up
Previous Track / Volume Down
USB Charging Port
LED indicator
Publicidad
