EN
FEATURES:
•
Tri-display count down
•
Maximum count down / up 23hr 59min 59sec
•
1 / 100 second count up display
SPECIFICATION:
Maximum Count Down / Up Range
Count Down Display Resolution
Count Up Display Resolution
Display Size
Digit Size
Battery
Product Size
INSTALLATION:
1. Slide down battery cover.
2. Install batteries with correct polarity positioning.
3. Put back battery cover.
4. Peel off display protective sheet.
5. Press and hold [CLOCK/TIMER] until display flashing
6. Press [12 / 24] button on the back to select 12 or 24 hours time format.
7. Press [HR], [MIN] and [SEC] to set the correct time.*
8. Press [CLOCK/TIMER] to finish clock setting.
OPERATION:
Count Down (Timer):
1. Press [CLOCK/TIMER] to select timer mode.
2. Press and hold [T1] until "TIMER 1" icon flashing.
3. Press [HR], [MIN] and [SEC] to set the desired count down time.*
4. Press [T1] to finish TIMER 1 setting.
5. Repeat above procedures 2-4 to set TIMER 2 and 3.
2
•
•
•
23 hours 59 minutes 59 seconds
1 second
1 / 100 second
42(W) x 45(H) mm
6(W) x 12(H) mm
3 volt, size CR2032 or equivalent x1 piece
(included)
61(W) x 118(H) x 17(D) mm
12 / 24 hours time format
Foldaway stand
Magnetic attachment