Blatchford Elite Blade Serie Instrucciones De Uso página 7

7 Cutting Shin to Length
Use appropriate health and safety equipment at all times including
extraction facilities.
Be aware of finger trap hazard at all times.
Note... The following instructions assume the use of the male, sliding, rotating pyramid. If an
alternative adapter is required, this should be taken into account throughout the build
process.
1.
Cut the blade 10–15 mm longer than required
and assemble fitting clamp (941255).
3.
Tighten fitting clamp bolts to 15 Nm
(check each screw at least twice).
5
5
15 Nm
7
2.
Fit socket to fitting clamp top housing and
tighten pyramid screws (15 Nm). Refer to
alignment page for initial setup.
4.
Stand user, carry out dynamic alignment and
walking trials. Adjust height to achieve definitive
length with weight evenly distributed.
4
15 Nm
938295S/2-0120